Port-Security Authorization Ignore; Port-Security Enable - HP 3600 v2 Series Command Reference Manual

Field
STATE
PORT INDEX
AGING TIME(s)
x mac address(es) found

port-security authorization ignore

Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the server (an RADIUS server or the local device).
Use the undo port-security authorization ignore command to restore the default.
By default, a port uses the authorization information from the server.
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user's account. For example, it may assign a VLAN.
Related commands: display port-security.
Examples
# Configure port Ethernet 1/0/1 to ignore the authorization information from the authentication server.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security authorization ignore

port-security enable

Syntax
port-security enable
undo port-security enable
View
System view
Description
Type of the MAC address added. "Security" means it is a secure MAC
address.
Port to which the secure MAC address belongs
Period of time before the secure MAC address ages out. "NOAGED"
is displayed for secure MAC addresses.
Number of secure MAC addresses stored
174