Organization-Unit; Pki Certificate Access-Control-Policy - HP 3600 v2 Series Command Reference Manual

organization-unit

Syntax
organization-unit org-unit-name
undo organization-unit
View
PKI entity view
Default level
2: System level
Parameters
org-unit-name: Organization unit name for distinguishing different units in an organization, a
case-insensitive string of 1 to 31 characters. No comma can be included.
Description
Use the organization-unit command to specify the name of the organization unit to which this entity
belongs.
Use the undo organization-unit command to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as group1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit group1

pki certificate access-control-policy

Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1
to 16 characters. It cannot be a, al, or all.
all: Specifies all certificate attribute-based access control policies.
Description
Use the pki certificate access-control-policy command to create a certificate attribute-based access
control policy and enter its view.
222