HP 3600 v2 Series Command Reference Manual page 92

Description
Use the key command to set the shared key for secure HWTACACS authentication, authorization, or
accounting communication.
Use the undo key command to remove the configuration.
By default, no shared key is configured.
The shared keys configured on the switch must match those configured on the HWTACACS servers.
Related commands: display hwtacacs.
Examples
# Set the shared key for secure HWTACACS accounting communication to plain text hello for
HWTACACS scheme hwt1 and specify to display the key in plain text.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting simple hello
[Sysname-hwtacacs-hwt1] display this
#
hwtacacs scheme hwt1
key accounting simple hello
#
return
# Set the shared key for secure HWTACACS accounting communication to plain text hello for
HWTACACS scheme hwt1 and specify to display the key in cipher text.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
[Sysname-hwtacacs-hwt1] display this
#
hwtacacs scheme hwt1
key accounting cipher IT8Q4sHnitM=
#
return
# Set the shared key for secure HWTACACS accounting communication to cipher text KWk+qJsfs9M=
for HWTACACS scheme hwt1 and specify to display the key in cipher text.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting cipher KWk+qJsfs9M=
[Sysname-hwtacacs-hwt1] display this
#
hwtacacs scheme hwt1
key accounting cipher KWk+qJsfs9M=
#
return
82