HP 3600 v2 Series Command Reference Manual page 75

With neither the cipher keyword nor the simple keyword specified, the key must be a plaintext string
•
of 1 to 64 characters, and the key will be displayed in cipher text.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the secondary RADIUS accounting
server belongs to, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server
is on the public network, do not specify this option.
Description
Use the secondary accounting command to specify secondary RADIUS accounting servers for a RADIUS
scheme.
Use the undo secondary accounting command to remove a secondary RADIUS accounting server.
By default, no secondary RADIUS accounting server is specified.
You can configure up to 16 secondary RADIUS accounting servers for a RADIUS scheme by executing
this command repeatedly. After the configuration, if the primary server fails, the switch looks for a
secondary server in active state (a secondary RADIUS accounting server configured earlier has a higher
priority) and tries to communicate with it.
The IP addresses of the accounting servers and those of the authentication/authorization servers must be
of the same IP version.
The IP addresses of the primary and secondary accounting servers must be different from each other.
Otherwise, the configuration fails.
If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
If you remove a secondary accounting server when the switch has already sent a start-accounting request
to the server, the communication with the secondary server will time out, and the switch will look for a
server in active state from the primary server on.
If you remove an accounting server being used by online users, the switch cannot send real-time
accounting requests and stop-accounting requests anymore for the users, and does not buffer the
stop-accounting requests.
NOTE:
The shared key configured by this command takes precedence over that configured by using the key
•
accounting [ cipher | simple ]
• The VPN specified by this command takes precedence over the VPN specified for the RADIUS scheme.
Related commands: key, state, and vpn-instance (RADIUS scheme view).
Examples
# For RADIUS scheme radius1, set the IP address of the secondary accounting server to 10.1 10.1.1, the
UDP port to 1813, and the shared key to the ciphertext string IT8Q4sHnitM=, and specify to display the
key in cipher text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813 key cipher IT8Q4sHnitM=
# For RADIUS scheme radius2, specify two secondary accounting servers with the server IP addresses of
10.1 10.1.1 and 10.1 10.1.2 and the UDP port number of 1813. Set the shared keys to plaintext string hello,
and specify to display the keys in cipher text.
<Sysname> system-view
key
command.
65