Ssh Client Source; Ssh2 - HP 3600 v2 Series Command Reference Manual

Related commands: display ssh client source.
Examples
# Specify the source IPv6 address as 2:2::2:2 for the SSH client.
<Sysname> system-view
[Sysname] ssh client ipv6 source ipv6 2:2::2:2

ssh client source

Syntax
ssh client source { ip ip-address | interface interface-type interface-number }
undo ssh client source
View
System view
Default level
3: Manage level
Parameters
ip ip-address: Specifies a source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type and number.
Description
Use the ssh client source command to specify the source IPv4 address or source interface of the SSH
client.
Use the undo ssh client source command to remove the configuration.
By default, an SSH client uses the IP address of the interface specified by the route of the device to access
the SSH server.
Related commands: display ssh client source.
Examples
# Specify the source IPv4 address of the SSH client as 192.168.0.1.
<Sysname> system-view
[Sysname] ssh client source ip 192.168.0.1

ssh2

Syntax
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
View
User view
Default level
0: Visit level
260