Proposal - HP 3600 v2 Series Command Reference Manual

Description
Use the ipsec proposal command to create an IPsec proposal and enter its view.
Use the undo ipsec proposal command to delete an IPsec proposal.
By default, no IPsec proposal exists.
An IPsec proposal created by using the ipsec proposal command takes the security protocol of ESP, the
encryption algorithm of DES, and the authentication algorithm of MD5 by default.
Related commands: display ipsec proposal.
Examples
# Create an IPsec proposal named newprop1.
<Sysname> system-view
[Sysname] ipsec proposal newprop1

proposal

Syntax
proposal proposal-name
undo proposal [ proposal-name ]
View
IPsec policy view
Default level
2: System level
Parameters
proposal-name: Name of the IPsec proposal for the IPsec policy to reference, a string of 1 to 32
characters.
Description
Use the proposal command to specify an IPsec proposal for the IPsec policy to reference.
Use the undo proposal command to remove an IPsec proposal reference by the IPsec policy.
By default, an IPsec policy references no IPsec proposal.
The IPsec proposals must already exist.
A manual IPsec policy can reference only one IPsec proposal. To replace a referenced IPsec proposal,
use the undo proposal command to remove the original proposal binding and then use the proposal
command to reconfigure one.
Related commands: ipsec proposal, and ipsec policy.
Examples
# Configure IPsec policy policy1 to reference IPsec proposal prop1.
<Sysname> system-view
[Sysname] ipsec proposal prop1
[Sysname-ipsec-proposal-prop1] quit
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] proposal prop1
242