Mac-Authentication - HP 3600 v2 Series Command Reference Manual

Field
Authenticate success: 0, failed: 0
Max number of on-line users
Current online user number
MAC Addr
Authenticate state
AuthIndex

mac-authentication

Syntax
In system view:
mac-authentication [ interface interface-list ]
undo mac-authentication [ interface interface-list ]
In Ethernet interface view:
mac-authentication
undo mac-authentication
View
System view, Ethernet interface view
Default level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type interface-number
[ to interface-type interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10
port ranges. The start port and end port of a port range must be of the same type and the end port
number must be greater than the start port number. A port range defined without the to interface-type
interface-number portion comprises only one port.
Description
Use the mac-authentication command in system view to enable MAC authentication globally.
Description
MAC authentication statistics, including the number of successful
and unsuccessful authentication attempts
Maximum number of concurrent online users allowed on the
port.
If MAC authentication is not enabled on the port, the field
displays 0.
Number of online users on the port.
MAC address of the online user.
User status. Possible values include the following:
•
MAC_AUTHENTICATOR_CONNECT—The user is logging
in.
•
MAC_AUTHENTICATOR_SUCCESS—The user has passed
the authentication.
•
MAC_AUTHENTICATOR_FAIL—The user failed the
authentication.
•
MAC_AUTHENTICATOR_LOGOFF—The user has logged
off.
Authenticator index.
126