Arp Anti-Attack Source-Mac Exclude-Mac - HP 3600 v2 Series Command Reference Manual

View
System view
Default level
2: System level
Parameters
time: Specifies the age timer for protected MAC addresses, in the range of 60 to 6000 seconds.
Description
Use the arp anti-attack source-mac aging-time command to configure the age timer for protected MAC
addresses.
Use the undo arp anti-attack source-mac aging-time command to restore the default.
By default, the age timer for protected MAC addresses is 300 seconds (five minutes).
Examples
# Configure the age timer for protected MAC addresses as 60 seconds.
<Sysname> system-view
[Sysname] arp anti-attack source-mac aging-time 60

arp anti-attack source-mac exclude-mac

Syntax
arp anti-attack source-mac exclude-mac mac-address&<1- 1 0>
undo arp anti-attack source-mac exclude-mac [ mac-address&<1- 1 0> ]
View
System view
Default level
2: System level
Parameters
mac-address&<1- 1 0>: Specifies a MAC address list. The mac-address argument indicates a protected
MAC address in the format H-H-H. &<1- 1 0> indicates the number of protected MAC addresses that you
can configure.
Description
Use the arp anti-attack source-mac exclude-mac command to configure protected MAC addresses that
are excluded from ARP packet detection.
Use the undo arp anti-attack source-mac exclude-mac command to remove the configured protected
MAC addresses.
By default, no protected MAC address is configured.
If no MAC address is specified in the undo arp anti-attack source-mac exclude-mac command, all the
configured protected MAC addresses are removed.
Examples
# Configure a protected MAC address.
<Sysname> system-view
304