Setting User Group Password Control Parameters; Setting Local User Password Control Parameters - HP 3600 v2 Series Configuration Manual

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and enter
user group view.
3. Configure the password
aging time for the user group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a local user and enter
local user view.
3. Configure the password
aging time for the local user.
4. Configure the minimum
password length for the local
user.
Command
system-view
user-group group-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
local-user user-name
password-control aging aging-time
password-control length length
228
Remarks
N/A
N/A
Optional
By default, the aging time of the
user group is the same as the
global password aging time.
Optional
By default, the minimum password
length of the user group is the same
as the global minimum password
length.
Optional
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Remarks
N/A
N/A
Optional
By default, the setting equals that
for the user group to which the
local user belongs. If no aging time
is configured for the user group,
the global setting applies to the
local user.
Optional
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.