Dot1X Multicast-Trigger; Dot1X Port-Control - HP 3600 v2 Series Command Reference Manual

# Configure Ethernet 1/0/2 through Ethernet 1/0/5 each to support a maximum of 32 concurrent
802.1X users.
<Sysname> system-view
[Sysname] dot1x max-user 32 interface ethernet 1/0/2 to ethernet 1/0/5

dot1x multicast-trigger

Syntax
dot1x multicast-trigger
undo dot1x multicast-trigger
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the dot1x multicast-trigger command to enable the 802.1X multicast trigger function. The device acts
as the initiator and periodically multicasts Identify EAP-Request packets out of a port to detect 802.1X
clients and trigger authentication.
Use the undo dot1x multicast-trigger command to disable the function.
By default, the multicast trigger function is enabled.
You can use the dot1x timer tx-period command to set the interval for sending multicast Identify
EAP-Request packets.
Related commands: display dot1x.
Examples
# Enable the multicast trigger function on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x multicast-trigger

dot1x port-control

Syntax
In system view:
dot1x port-control { authorized-force | auto | unauthorized-force } [ interface interface-list ]
undo dot1x port-control [ interface interface-list ]
In Ethernet interface view:
dot1x port-control { authorized-force | auto | unauthorized-force }
undo dot1x port-control
113