HP 3600 v2 Series Command Reference Manual page 110

View
System view
Default level
2: System level
Parameters
user-name: user-name: RADIUS username, a case-sensitive string of 1 to 64 characters that can contain
the domain name. It cannot contain question mark (?),less-than sign (<), greater-than sign (>), backward
slash (\), quotation mark ("), percent sign (%), apostrophe ('), ampersand (&), number sign (#), or
spaces and cannot be a, al, or all.
all: Removes all RADIUS users.
Description
Use the radius-server user command to create a RADIUS user and enter RADIUS-server user view.
Use the undo radius-server user command to delete the specified RADIUS user or all RADIUS users.
By default, no RADIUS user exists.
If the switch is configured to send usernames that carry the domain name to the RADIUS server, the
username of the RADIUS user configured here must contain the domain name. If not, the username of the
RADIUS user configured here does not contain the domain name.
Related commands: user-name-format (RADIUS scheme view).
Examples
# Create RADIUS user user1 and enter its view.
<Sysname> system-view
[Sysname] radius-server user user1
[Sysname-rdsuser-user1]
100