HP 3600 v2 Series Command Reference Manual page 215

Default level
2: System level
Parameters
keyname: Specifies a public key name, a case-sensitive string of 1 to 64 characters.
filename: Specifies the name of the file that saves the peer host public key. For more information about
file name, see Fundamentals Configuration Guide.
Description
Use the public-key peer import sshkey command to import a peer host public key from the public key file.
Use the undo public-key peer command to remove the specified peer host public key.
After execution of this command, the system automatically transforms the host public key in SSH1,
SSH2.0 or OpenSSH format to PKCS format, and imports the key. This operation requires that you get a
copy of the public key file from the peer device through FTP or TFTP in binary mode in advance.
Related commands: display public-key peer.
Examples
# Import the peer host public key named key2 from the public key file key.pub.
<Sysname> system-view
[Sysname] public-key peer key2 import sshkey key.pub
205