Display Vxlan Neighbor-Discovery Server Member - HP 6127XLG Series Command Reference Manual

display vxlan neighbor-discovery server member

Use display vxlan neighbor-discovery server member to display information about ENDP neighbors that
have registered with an ENDS on the device.
Syntax
display vxlan neighbor-discovery server member [ interface tunnel interface-number | local local-ip |
remote client-ip ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface tunnel interface-number: Specifies an existing NVE tunnel interface by its number.
local local-ip: Specifies the IPv4 address of an ENDS on the device.
remote client-ip: Specifies the IPv4 address of an ENDP neighbor.
Usage guidelines
Each neighbor entry includes the IP address, bridge MAC address, entry creation time, and aging time
of a neighbor.
If you do not specify any parameters, this command displays all IPv4 ENDP neighbors that have
registered with each ENDS on the device.
Examples
# Display IPv4 ENDP neighbor entries of all ENDSs on the device.
<Sysname> display vxlan neighbor-discovery server member
Interface: Tunnel0
IP Address: 11.0.0.1
Client Address
11.0.0.1
11.0.0.3
11.0.0.4
11.0.0.5
Interface: Tunnel1
IP Address: 11.0.1.2
Client Address
11.0.1.2
11.0.1.3
11.0.1.4
11.0.1.5
Interface: Tunnel2
IP Address: 12.0.0.1
Client Address
Network ID: 1
System ID Expire
000F-0001-0001 20
000F-0001-0002 25
000F-0001-0003 15
000F-0001-0004 20
Network ID: 2
System ID Expire
000F-0001-0010 20
000F-0001-0011 19
000F-0001-0012 30
000F-0001-0013 20
Network ID: 3
System ID Expire
Created Time
2011/01/01 00:00:30
2011/01/01 00:00:43
2011/01/01 01:00:46
2011/01/01 01:02:13
Created Time
2011/01/01 00:19:25
2011/01/01 00:19:31
2011/01/01 02:00:43
2011/01/01 01:02:13
Created Time
34