Port-Security Authorization Ignore - HP 6125G Command Reference Manual

MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
# Display information about secure MAC addresses of port GigabitEthernet 1/0/1 in VLAN 1.
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
Table 14 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)
x mac address(es) found

port-security authorization ignore

Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use port-security authorization ignore to configure a port to ignore the authorization information from
the server (an RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
By default, a port uses the authorization information from the server.
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user's account. For example, it may assign a VLAN.
VLAN ID STATE
1 Security
---
VLAN ID STATE
1 Security
---
Description
Secure MAC address
ID of the VLAN to which the port belongs
Type of the MAC address added. "Security" means it is a secure MAC
address.
Port to which the secure MAC address belongs
Period of time before the secure MAC address ages out. "NOAGED"
is displayed for secure MAC addresses.
Number of secure MAC addresses stored
PORT INDEX
GigabitEthernet1/0/1
PORT INDEX
GigabitEthernet1/0/1
129
AGING TIME(s)
NOAGED
AGING TIME(s)
NOAGED