Mac Authentication Configuration Commands; Display Mac-Authentication - HP 5120 SI series Command Reference Manual

MAC authentication configuration commands

display mac-authentication

Syntax
display mac-authentication [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface interface-list: Specifies a port list, in the format of { interface-type interface-number [ to
interface-type interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10 port
ranges. The start port and end port of a port range must be of the same type and the end port number
must be greater than the start port number. A port range defined without the to interface-type
interface-number portion comprises only one port.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display mac-authentication command to display MAC authentication settings and statistics,
including the global settings, and port-specific settings and MAC authentication and online user
statistics.
If you specify a list of ports, the command displays port-specific settings and statistics only for the
specified ports.
If you do not specify any port, the command displays port-specific settings and statistics for all ports.
Examples
# Display all MAC authentication settings and statistics.
<Sysname> display mac-authentication
MAC address authentication is enabled.
User name format is MAC address in lowercase, like xxxxxxxxxxxx
Fixed username:mac
Fixed password:not configured
Offline detect period is 300s
Quiet period is 60s.
Server response timeout value is 100s
116