10.3 Panel Operator
10.3.1 Panel Operator Key Names and Functions
10.3
Panel Operator
10.3.1 Panel Operator Key Names and Functions
The Panel Operator consists of a panel display and Panel Operator keys.
You can use the Panel Operator to set parameters, display status, execute utility functions, and
monitor SERVOPACK operation.
The Panel Operator key names and functions are given below.
10.3.2 Changing Modes
Press the MODE/SET Key to change between the modes as shown below.
Refer to the reference pages for the operating procedures in each function mode.
10-20
Panel di play
Panel Operator
Power ON
the MODE/SET Key.
Pre
the DATA/SHIFT Key
Pre
for approx. 1 econd.
the MODE/SET Key.
Pre
the DATA/SHIFT Key
Pre
for approx. 1 econd.
the MODE/SET Key.
Pre
the DATA/SHIFT Key
Pre
for approx. 1 econd.
the MODE/SET Key.
Pre
Key
Key Name
No.
• Changes the display.
MODE/SET
• Confirms settings.
Key
UP Key
Increases the setting.
DOWN Key
Decreases the setting.
• Displays the setting. To display the
setting, press the DATA/SHIFT Key
DATA/SHIFT
for approximately one second.
Key
• Moves to the next digit on the left
when a digit is flashing.
Status Display Mode
Utility Function Mode (Fn)
Parameter Setting Mode (Pn)
Monitor Display Mode (Un)
Function
Analog