Table of Contents
Advertisement
9.2 List of Parameters
9.2.2 List of Parameters
Parameter
No.
Pn139
Pn13D
Pn140
Pn141
Pn142
Pn143
9-14
Name
Automatic Gain Switch-
2
ing Selections 1
Gain Switching Selection
Use manual gain switching.
0
The gain is switched manually with the /G-SEL (Gain Selection) signal.
1
Reserved setting (Do not use.)
n.
X
Use automatic gain switching pattern 1.
The gain is switched automatically from the first gain to the second gain when
2
switching condition A is satisfied. The gain is switched automatically from the
second gain to the first gain when switching condition A is not satisfied.
Gain Switching Condition A
0
/COIN (Positioning Completion Output) signal turns ON.
1
/COIN (Positioning Completion Output) signal turns OFF.
n.
X
2
/NEAR (Near Output) signal turns ON.
3
/NEAR (Near Output) signal turns OFF.
4
Position reference filter output is 0 and reference pulse input is OFF.
5
Position reference pulse input is ON.
n.
X
Reserved parameter (Do not change.)
n.X
Reserved parameter (Do not change.)
2
Current Gain Level
Model Following Con-
2
trol-Related Selections
Model Following Control Selection
n.
X
0
Do not use model following control.
1
Use model following control.
Vibration Suppression Selection
0
Do not perform vibration suppression.
n.
X
1
Perform vibration suppression for a specific frequency.
2
Perform vibration suppression for two specific frequencies.
Vibration Suppression Adjustment Selection
Do not adjust vibration suppression automatically during execu-
0
tion of autotuning without a host reference, autotuning with a
n.
X
host reference, and custom tuning.
Adjust vibration suppression automatically during execution of
1
autotuning without a host reference, autotuning with a host ref-
erence, and custom tuning.
Speed Feedforward (VFF)/Torque Feedforward (TFF) Selection
Do not use model following control and speed/torque feedfor-
0
n.X
ward together.
Use model following control and speed/torque feedforward
1
together.
Model Following Con-
2
trol Gain
Model Following Con-
2
trol Gain Correction
Model Following Con-
2
trol Bias in the Forward
Direction
Setting
Setting
Default
Range
Unit
Setting
0000h
to
–
0000
0052
h
100 to 2,000
1%
2000
0000h
to
–
0100
1121
h
10 to 20,000
0.1/s
500
500 to 2,000
0.1%
1000
0 to 10,000
0.1%
1000
Continued from previous page.
Applicable
When
Motors
Enabled
fication
Immedi-
All
h
ately
Immedi-
All
ately
Immedi-
All
h
ately
Immedi-
All
ately
Immedi-
All
ately
Immedi-
All
ately
Continued on next page.
Classi-
Refer-
ence
Tuning
*1
*1
Tuning
Tuning
–
Reference
*1
Reference
*1
Reference
*1
Reference
*1
*1
Tuning
Tuning
*1
Tuning
*1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
