4.3
Test Without Motor Function
The test without motor function is used to check the operation of the host controller and peripheral devices by
simulating the operation of the linear servomotor in the SERVOPACK, i.e., without actually operating the lin-
ear servomotor. This function enables checking wiring and verifying the system and parameters when errors
occur while debugging the system, thus shortening the time required for setup work and preventing damage to
the equipment that may result from possible malfunctions. The operation of the linear servomotor can be
checked during performing this function regardless of whether the linear servomotor is actually connected or
not.
Host controller
4.3.1 Related Parameters
The following parameters are used for the test without motor.
Parameter
n.
n.
Pn00C
n. 0
n. 1
SERVOPACK
Reference
Reference
Response
Response
0
Disables the test without motor. [Factory setting]
1
Enables the test without motor.
Sets incremental linear scale as linear scale type for the test without
motor. [Factory setting]
Sets absolute linear scale as linear scale type for the test without
motor.
Simulates the operation
without motor.
Meaning
4.3 Test Without Motor Function
When
Classification
Enabled
After
Setup
restart
4
4-27