List Of Configuration Devices - Mitsubishi Electric AJ65BT-D75P2-S3 User Manual

2 SYSTEM CONFIGURATION

2.2 List of configuration devices

No. Part name
1 Positioning module
AD75 software
2
package
3 Personal computer
4 Teaching unit
5 Conversion cable
Connection cable
6
(converter)
7 Drive unit
Manual pulse
8
generator
Connection cable
9
(dedicated)
Connection cable
10
(prepared by user)
Important
To use the D75P2, either the "AD75 software package" or "Teaching unit" is required.
The positioning system using the D75P2 is configured of the following devices.
Type
AJ65BT-D75P2-
S3
SW1IVD-AD75P-E DOS/V personal computer software package*
SW0D5C-AD75P-E For details, refer to the GX Configurator-AP Operating Manual.
(Prepared by user)
DOS/V personal
computer
Refer to the AD75 Software Package Operating Manual for details.
AD75TU Ver. D Unit for setting, monitoring and testing the D75P2 parameters and
or more positioning data.
A1SD75-C01H
Length 30cm
A1SD75-C01HA
RS-232 cable for connecting D75P2 with DOS/V personal computer, and
– RS-232/RS-422 converter. (Prepared by user)
Refer to the AD75 Software Package Operating Manual for details.
– (Prepared by user)
(Prepared by user)
–
Recommended: MR-HDP01 (Mitsubishi Electric)
2
For MR-H
AD75C20SNH*
2
For MR-J2/J2S-A
AD75C20SNJ2*
AD75C20SC For MR-C
Cable for connecting D75P2 with drive unit, manual pulse generator or
– machine system input signal. (Prepared by user)
Refer to manual of connected device.
1
* Compatible as AD75P2-S3.
2
* Compatible with absolute position detection system.
Remarks
Cable for connecting RS-422 cable and D75P2.
Cable for connecting D75P2 with drive unit, manual
pulse generator or machine system input signal.
2 - 4
MELSEC-A
–
1