Advertisement
4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT
4.1.3 Handling precautions
Use the PLC within the general specifications environment given in this manual.
Using the PLC outside the general specification range environment could lead to electric
shocks, fires, malfunctioning, product damage or deterioration.
Do not directly touch the conductive section and electronic parts of the module.
Failure to observe this could lead to module malfunctioning or trouble.
When not connecting a drive unit or peripheral device, always install a cover on the connector
section.
Failure to observe this could lead to malfunctioning.
Make sure that foreign matter, such as cutting chips or wire scraps, do not enter the module.
Failure to observe this could lead to fires, trouble or malfunctioning.
Never disassemble or modify the module.
Failure to observe this could lead to trouble, malfunctioning, injuries or fires.
Handle the D75P2 and cable while observing the following precautions.
(1) Handling precautions
!
WARNING
4 - 5
MELSEC-A
Advertisement
Chapters
Troubleshooting
