Displaying Embedded Event Manager Registered Policies - Cisco Catalyst 2960 series Configuration Manual

Example:
Device# show event manager history events
No. Time of Event
1 Fri Aug13
2 Fri Aug13
3 Wed Aug18
4 Wed Aug18
5 Wed Aug18
6 Wed Aug18
7 Wed Aug18
8 Wed Aug18
Step 6
show event manager history traps {server | policy}
Use this command to display the EEM SNMP traps that have been sent either from the EEM server or from an EEM
policy. In the following example, the EEM SNMP traps that were triggered from within an EEM policy are displayed.
Example:
Device# show event manager history traps policy
No. Time
1 Wed Aug18
2 Wed Aug18
3 Wed Aug18

Displaying Embedded Event Manager Registered Policies

Perform this optional task to display registered EEM policies.
SUMMARY STEPS
1. enable
2. show event manager policy registered [event-type event-name] [time-ordered| name-ordered]
DETAILED STEPS
Step 1 enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Device> enable
Step 2 show event manager policy registered [event-type event-name] [time-ordered| name-ordered]
Use this command with the time-ordered keyword to display information about currently registered policies sorted by
time, for example:
Event Type
21:42:57 2004 snmp
22:20:29 2004 snmp
21:54:48 2004 snmp
22:06:38 2004 snmp
22:30:58 2004 snmp
22:34:58 2004 snmp
22:51:18 2004 snmp
22:51:18 2004 application
Trap Type
22:30:58 2004 policy
22:34:58 2004 policy
22:51:18 2004 policy
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Write EEM Policies Using the Cisco IOS CLI
Name
applet: SAAping1
applet: SAAping1
applet: SAAping1
applet: SAAping1
applet: SAAping1
applet: SAAping1
applet: SAAping1
applet: CustApp1
Name
EEM Policy Director
EEM Policy Director
EEM Policy Director
1707