Changing The Retry Count - Cisco Catalyst 2960 series Configuration Manual

How to Configure VMPS

Changing the Retry Count

Follow these steps to change the number of times that the switch attempts to contact the VMPS before querying
the next server.
SUMMARY STEPS
1. enable
2. configure terminal
3. vmps retry count
4. end
5. show vmps
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3 vmps retry count
Example:
Switch(config)# vmps retry 5
Step 4
end
Example:
Switch(config)# end
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2160
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Changes the retry count. The retry range is 1 to 10; the
default is 3.
Returns to privileged EXEC mode.