Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
show vtp status
Example:
Switch# show vtp status
Step 3
configure terminal
Example:
Switch# configure terminal
Step 4 vtp domain domain-name
Example:
Switch(config)# vtp domain domain123
Step 5 end
Example:
Switch(config)# end
Step 6
show vtp status
Example:
Switch# show vtp status
Step 7
configure terminal
Example:
Switch# configure terminal
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Checks the VTP configuration revision number.
If the number is 0, add the switch to the VTP domain.
If the number is greater than 0, follow these substeps:
Enters the global configuration mode.
Changes the domain name from the original one displayed in Step
1 to a new name.
Returns to privileged EXEC mode. The VLAN information on the
switch is updated and the configuration revision number is reset to
0.
Verifies that the configuration revision number has been reset to 0.
Enters global configuration mode.

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

• Write down the domain name.
• Write down the configuration revision number.
• Continue with the next steps to reset the switch configuration
revision number.
How to Configure VTP
2103