Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Working with the Flash File System
Command or Action
Example:
switch# archive tar /create
tftp:172.20.10.30/saved.
flash:/new-configs
Step 2
archive tar /table source-url
Example:
switch# archive tar /table
flash: /new_configs
Step 3 archive tar /xtract source-url
flash:/file-url [dir/file...]
Example:
switch# archive tar /xtract
tftp:/172.20.10.30/saved.
flash:/new-configs

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

2046
Purpose
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/directory]/-filename.
• TFTP syntax:
tftp:[[//location]/directory]/-filename.
For flash:/file-url, specify the location on the local flash file system in which the
new file is created. You can also specify an optional list of files or directories within
the source directory to add to the new file. If none are specified, all files and
directories at this level are written to the newly created file.
Displays the contents of a file.
For source-url, specify the source URL alias for the local or network file system.
The -filename. is the file to display. These options are supported:
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/directory]/-filename.
• TFTP syntax:
tftp:[[//location]/directory]/-filename.
You can also limit the file displays by specifying a list of files or directories after
the file. Only those files appear. If none are specified, all files and directories appear.
Extracts a file into a directory on the flash file system.
For source-url, specify the source URL alias for the local file system. The -filename.
is the file from which to extract files. These options are supported:
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/directory]/-filename.