Configuration Examples For Auto Identity - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 interface type number
Example:
Switch(config)# interface gigabitethernet 1/0/1
Step 4 source template {AI_CLOSED_MODE |
AI_LOW_IMPACT_MODE | AI_MONITOR_MODE |
template-name} [merge]
Example:
Switch(config-if)# source template AI_CLOSED_MODE
Step 5 source template {AI_CLOSED_MODE |
AI_LOW_IMPACT_MODE | AI_MONITOR_MODE |
template-name} [merge]
Example:
Switch(config-if)# source template AI_MONITOR_MODE
merge
Step 6
switchport access vlan vlan-id
Example:
Switch(config-if)# switchport access vlan 100
Step 7 switchport voice vlan vlan-id
Example:
Switch(config-if)# switchport voice vlan 101
Step 8 Repeat Steps 4, 6, and 7 on all interfaces that must have the
Auto Identity feature configured.
Step 9
end
Example:
Switch(config-if)# end

Configuration Examples for Auto Identity

Example: Configuring Auto Identity Globally
Switch> enable
Switch# configure terminal
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Enters global configuration mode.
Configures an interface and enters interface
configuration mode.
Configures a source template for the interface.
(Optional) Configures a source template for the
interface and merges this template with the previously
configured template
• When you configure two templates, if you do not
configure the merge keyword, the last configured
template is used.
Sets the VLAN when the interface is in access mode.
Configures a voice VLAN on a multiple VLAN access
port.
—
Exits interface configuration mode and returns to
privileged EXEC mode.
Auto Identity
1459