Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs Also See for Catalyst 2960 series:
Table of Contents

Advertisement

SUMMARY STEPS
1. configure terminal
2. ip rcmd remote-username username
3. end
4. Do one of the following:
DETAILED STEPS
Command or Action
Step 1
configure terminal
Step 2
ip rcmd remote-username username
Step 3
end
Step 4
Do one of the following:
• copy
rcp:[[[//username@]location]/directory]/filename]system:running-config
• copy
rcp:[[[//username@]location]/directory]/filename]nvram:startup-config
This example shows how to copy a configuration file named host1-confg from the netadmin1 directory on
the remote server with an IP address of 172.16.101.101 and load and run those commands on the switch:
Switch#
Configure using host1-confg from 172.16.101.101? [confirm]
Connected to 172.16.101.101
Loading 1112 byte file host1-confg:![OK]
Switch#
%SYS-5-CONFIG: Configured from host1-config by rcp from 172.16.101.101
This example shows how to specify a remote username of netadmin1. Then it copies the configuration file
host2-confg from the netadmin1 directory on the remote server with an IP address of 172.16.101.101to the
startup configuration:
Switch#
Switch(config)#
Switch(config)#
Switch#
• copy rcp:[[[//username@]location]/directory]/filename]system:running-config
• copy rcp:[[[//username@]location]/directory]/filename]nvram:startup-config
copy rcp://netadmin1@172.16.101.101/host1-confg system:running-config
configure terminal
ip rcmd remote-username netadmin1
end
copy rcp: nvram:startup-config

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Working with Configuration Files
Purpose
Enter global configuration mode on the
switch.
This step is required only if you override the
default remote username (see Steps 2 and
3).
(Optional) Change the default remote
username.
Return to privileged EXEC mode.
Using RCP, copy the configuration file from
a network server to the running configuration
or to the startup configuration file.
2057

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents