Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Environment Variable
_config_cmd2
_crash_reporter_debug
_crash_reporter_url
_cron_entry
_email_server
_email_to
_email_from
_email_cc
_email_ipaddr
_info_snmp_oid
_info_snmp_value
_show_cmd
_syslog_pattern

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Description
(Optional) The second
configuration command that is
executed.
(Optional) A value that identifies
whether debug information for
tm_crash_reporter.tcl will be
enabled.
The URL location to which the
crash report is sent.
A CRON specification that
determines when the policy will
run. See the "Writing Embedded
Event Manager Policies Using Tcl"
module for more information about
how to specify a cron entry.
A Simple Mail Transfer Protocol
(SMTP) mail server used to send
e-mail.
The address to which e-mail is sent.
The address from which e-mail is
sent.
The address to which the e-mail is
be copied.
The source IP address of the
recipient.
The SNMP object ID.
The value string of the associated
SNMP data element.
The CLI show command to be
executed when the policy is run.
A regular expression pattern match
string that is used to compare
syslog messages to determine when
the policy runs.
Information About Embedded Event Manager
Example
no shutdown
1
http://www.yourdomain.com/
fm/interface_tm.cgi
0-59/1 0-23/1 * * 0-7
mailserver.yourdomain.com
engineer@yourdomain.com
devtest@yourdomain.com
manager@yourdomain.com
209.165.201.1 or (IPv6 address)
2001:0DB8::1
1.3.6.1.2.1.2 or
iso.internet.mgmt.mib-2.interfaces
show version
.*UPDOWN.*FastEthernet 0/0.*
1677