Configuring Switch-To-Radius-Server Communication - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
aaa authorization auth-proxy default group {tacacs+ |
radius}
Example:
Switch(config)# aaa authorization auth-proxy default
group tacacs+
Step 6 tacacs-server host {hostname | ip_address}
Example:
Switch(config)# tacacs-server host 10.1.1.1
Step 7
tacacs-server key {key-data}
Example:
Switch(config)# tacacs-server key
Step 8
end
Example:
Switch(config)# end
Step 9 show running-config
Example:
Switch# show running-config
Step 10
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring Switch-to-RADIUS-Server Communication

Follow these steps to configure the RADIUS server parameters:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Web-Based Authentication
Purpose
Creates an authorization method list for web-based
authorization.
Specifies an AAA server.
Configures the authorization and encryption key
used between the switch and the TACACS server.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration
file.
1435