Configuring Load Sharing Using Stp Path Cost - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 19
exit
Example:
Switch(config-if)# exit
Step 20 interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 21
spanning-tree vlan vlan-range port-priority
priority-value
Example:
Switch(config-if)# spanning-tree vlan 3-6
port-priority 16
Step 22 end
Example:
Switch(config-if)# end
Step 23
show running-config
Example:
Switch# show running-config
Step 24 copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Network Load Sharing Using STP Priorities, on page 2132

Configuring Load Sharing Using STP Path Cost

These steps describe how to configure a network with load sharing using STP path costs.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure VLAN Trunks
Purpose
Returns to global configuration mode.
Defines the interface to set the STP port priority, and
enters interface configuration mode.
Assigns the port priority for the VLAN range specified.
Enter a port priority value from 0 to 240. Port priority
values increment by 16.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
2145