Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Event Type
nd_cdp_hold_time
nd_cdp_mgmt_domain
nd_cdp_platform
nd_cdp_version
nd_cdp_capabilities_string
nd_cdp_capabilities_bits
nd_cdp_capabilities_bit_[0-31]
LLDP-specific Event_reqinfo
nd_protocol
nd_proto_notif
nd_proto_new_entry
nd_lldp_chassis_id
nd_lldp_system_name
nd_lldp_system_description
nd_lldp_ttl
nd_lldp_port_description

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

event_register_neighbor_discovery
Description
The time remaining until the cdp cache entry expires
and is deleted from the cdp table. This time will be
reset to some maximum by an update from the cdp
neighbor. It is usually set to 0 for new entries.
The CDP VTP management domain.
The platform name reported by the remote device.
The version of code running on the remote device.
The contents of the CDP capabilities field in a string
format: Router, Trans-Bridge, Source-Route-Bridge,
Switch, Host, IGMP, Repeater, Phone,
Remotely-Managed device, CVTA phone port,
Two-port Mac Relay or any combination of these
separated by commas.
The CDP capabilities bits in a hexadecimal number
preceded with 0x.
A series of values that will be set to YES if that bit
in the capabilities field is set or NO if it is not set.
Identifies which protocol triggered the event, for
LLDP it will always be set to lldp.
Identifies which type of protocol event triggered the
event, add, update or delete.
If set to 1, the event was triggered because the cache
entry is new, otherwise it will be set to 0.
The chassis id field from the LLDP cache entry.
The system name from the LLDP cache entry.
The system description field from the LLDP cache
entry.
The LLDP time to live field from the LLDP cache
entry.
The port description field from the LLDP cache entry.
1909