Enabling Mac Move - Cisco Catalyst 2960 series Configuration Manual

How to Configure 802.1x Port-Based Authentication
Command or Action
Step 3
switchport mode access
Example:
Switch(config-if)# switchport mode access
Step 4 dot1x max-req count
Example:
Switch(config-if)# dot1x max-req 4
Step 5 end
Example:
Switch(config-if)# end

Enabling MAC Move

MAC move allows an authenticated host to move from one port on the switch to another.
Beginning in privileged EXEC mode, follow these steps to globally enable MAC move on the switch. This
procedure is optional.
SUMMARY STEPS
1. configure terminal
2. authentication mac-move permit
3. end
4. show running-config
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2 authentication mac-move permit
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1374
Purpose
Sets the port to access mode only if you previously configured
the RADIUS server.
Sets the number of times that the switch restarts the
authentication process before the port changes to the
unauthorized state. The range is 0 to 10; the default is 2.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Enables MAC move on the switch. Default is deny.