X Authentication Configuration Guidelines - Cisco Catalyst 2960 series Configuration Manual

Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs Also See for Catalyst 2960 series:
Table of Contents

Advertisement

Feature
Quiet period
Retransmission time
Maximum retransmission number
Client timeout period
Authentication server timeout period
Inactivity timeout
Guest VLAN
Inaccessible authentication bypass
Restricted VLAN
Authenticator (switch) mode
MAC authentication bypass
Voice-aware security

802.1x Authentication Configuration Guidelines

802.1x Authentication
These are the 802.1x authentication configuration guidelines:
• When 802.1x authentication is enabled, ports are authenticated before any other Layer 2 or Layer 3
features are enabled.
• If the VLAN to which an 802.1x-enabled port is assigned changes, this change is transparent and does
not affect the switch. For example, this change occurs if a port is assigned to a RADIUS server-assigned
VLAN and is then assigned to a different VLAN after re-authentication.
Default Setting
60 seconds (number of seconds that the switch remains in the quiet
state following a failed authentication exchange with the client).
30 seconds (number of seconds that the switch should wait for a
response to an EAP request/identity frame from the client before
resending the request).
2 times (number of times that the switch will send an
EAP-request/identity frame before restarting the authentication
process).
30 seconds (when relaying a request from the authentication server
to the client, the amount of time the switch waits for a response
before resending the request to the client.)
30 seconds (when relaying a response from the client to the
authentication server, the amount of time the switch waits for a
reply before resending the response to the server.)
You can change this timeout period by using the dot1x timeout
server-timeout interface configuration command.
Disabled.
None specified.
Disabled.
None specified.
None specified.
Disabled.
Disabled.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure 802.1x Port-Based Authentication
1353

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents