Default Vlan Configurations - Cisco Catalyst 2960 series Configuration Manual

• For VTP version 1 or 2, you can set the VTP mode to transparent in global configuration mode. You
should save this configuration to the startup configuration so that the switch boots up in VTP transparent
mode. Otherwise, you lose the extended-range VLAN configuration if the switch resets. If you create
extended-range VLANs in VTP version 3, you cannot convert to VTP version 1 or 2.
• Although the switch stack supports a total of 1000 (normal-range and extended-range) VLANs, the
number of configured features affects the use of the switch hardware. If you try to create an extended-range
VLAN and there are not enough hardware resources available, an error message is generated, and the
extended-range VLAN is rejected.
• In a switch stack, the whole stack uses the same running configuration and saved configuration, and
extended-range VLAN information is shared across the stack.
Related Topics
Creating an Extended-Range VLAN
Creating an Extended-Range VLAN with an Internal VLAN ID
Monitoring VLANs
Creating an Extended-Range VLAN
Creating an Extended-Range VLAN with an Internal VLAN ID
Monitoring VLANs
Creating an Extended-Range VLAN
Creating an Extended-Range VLAN with an Internal VLAN ID
Monitoring VLANs
Creating an Extended-Range VLAN
Creating an Extended-Range VLAN with an Internal VLAN ID
Monitoring VLANs
Creating an Extended-Range VLAN
Creating an Extended-Range VLAN with an Internal VLAN ID
Monitoring VLANs
Creating an Extended-Range VLAN, on page 2122
Example: Creating an Extended-Range VLAN, on page 2127

Default VLAN Configurations

Default Ethernet VLAN Configuration
The following table displays the default configuration for Ethernet VLANs.
Note The switch supports Ethernet interfaces exclusively. Because FDDI and Token Ring VLANs are not
locally supported, you only configure FDDI and Token Ring media-specific characteristics for VTP global
advertisements to other switches.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Information About VLANs
2115