Configuration Examples For Web-Based Authentication - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Example:
Device> enable
Step 2
show ip auth-proxy configuration
Example:
Device# show ip auth-proxy configuration
Step 3 show ip auth-proxy cache
Example:
Device# show ip auth-proxy cache
Step 4
show ip http server secure status
Example:
Device# show ip http server secure status

Configuration Examples for Web-Based Authentication

Example: Configuring the Authentication Rule and Interfaces
This example shows how to enable web-based authentication on Fast Ethernet port 5/1 :
Switch(config)# ip admission name webauth1 proxy http
Switch(config)# interface fastethernet 5/1
Switch(config-if)# ip admission webauth1
Switch(config-if)# exit
Switch(config)# ip device tracking
This example shows how to verify the configuration:
Switch# show ip admission status
IP admission status:
Enabled interfaces
Total sessions
Init sessions
TCP half-open connections
TCP new connections
TCP half-open + new
HTTPD1 Contexts
Parameter Map: Global
Limit reached
Custom Pages
Custom pages not configured
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Configuration Examples for Web-Based Authentication
Purpose
• Enter your password if prompted.
Displays the current authentication proxy configuration.
Displays the list of user authentication entries.
The authentication proxy cache lists the host IP address, the source
port number, the timeout value for the authentication proxy, and
the state of the connection. If the authentication proxy state is
HTTP_ESTAB, the user authentication was successful.
Displays HTTPS status.
0
0
0 Max init sessions allowed
0 Hi watermark
0 Hi watermark
0 Hi watermark
0 Hi watermark
0 Hi watermark
100
0
0
0
0
0
1449