Table of Contents
Advertisement
Parameter
Device
Notification for
Unreceived
Message
Authorisation
for External
Message
Delivery
Prompt Mode
Authorisation
for Auto
Forwarding
Mailbox
Number
Delay Time
Forwarding
Mode
Installation Manual
Value Range
(Default)
1. Yes
When this parameter has been set to "Yes" and when
2. No
unplayed messages remain, the system calls the
appropriate device in numerical order until all unplayed
(No)
messages are received.
1. Yes
When set to "Yes", Subscribers are able to utilise the
2. No
External Message Delivery feature. The sub-parameter
to be set is Prompt Mode. If set to "No", sub-parameter
(No)
cannot be assigned.
1. System
Specifies the language to be used for voice prompts.
2. User 1
3. User 2
4. Selective
(User 1)
1. Yes
When set to "Yes," messages that have not been accessed
2. No
for a specific length of time are forwarded automatically
(No)
to another mailbox. The sub-parameters to be set for this
feature include Mailbox Number, Delay Time, and
Forwarding Mode. If set to "No", sub-parameters cannot
be assigned.
2-5 digits
Specifies the mailbox where forwarded messages are to
(None)
be sent.
Note: System Group Distribution List numbers, and
mailbox numbers for System Manager and Message
Manager cannot be used for this parameter.
(h) (min)
Specifies the length of time in hours and minutes that the
system must wait before forwarding messages that have
00:05 to 99:59
not been retrieved. The maximum delay time is 99 h, 59
(00:30)
min.
Note: The delay time must be less than the New Message
Retention Time, or else messages will be deleted before
being forwarded.
1. Copy
Specifies if forwarded messages are to be retained in the
2. Move
original mailbox. When set to "Copy," a copy of the
(Move)
message is retained in the original mailbox after
forwarding. When set to "Move," messages are
forwarded to the receiving mailbox and are not retained
at the original location.
SYSTEM ADMINISTRATOR'S GUIDE
Table 38
Description/Function
197
Advertisement
Table of Contents
Troubleshooting
