Panasonic KX-TVP50E Installation Manual page 222

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Service
Mode
In Automatic Mode, services have this order of priority:
Holiday Service > Caller ID Call Routing > Trunk Service > Port Service
(Holiday service has the highest priority.)
In Manual Modes (Day, Night, Lunch, or Break), services have this order of priority:
Caller ID Call Routing > Trunk Service > Port Service
(Holiday Service is disregarded.)
Time Service-Time Service
Time Service is a timer function that selects the desired call handling method based upon time
of day: Day, Night, Lunch and Break Services are available.
Night Service can be assigned within Day Service parameters; Night Service starts when Day
Service ends, and ends when Day Service starts. There are 3 periods for Break Service: Break
1 Service, Break 2 Service and Break 3 Service.
In each Time Service period, the parameters for Port Service, Trunk Group Service and
Operator's Parameters can be specified differently.
222
Value Range
(Default)
1. Automatic Assigns a specific Service Mode. There are 6 options
Mode available:
2. Manual Day
Mode 1. Automatic Mode—Operates according to the setting in
3. Manual
Night Mode 2. Manual Day Mode—Operates only in Day Mode.
4. Manual 3. Manual Night Mode—Operates only in Night Mode.
Lunch Mode 4. Manual Lunch Mode—Operates only in Lunch Mode.
5. Manual 5. Manual Break Mode—Operates only in Break Mode.
Break Mode 6. PBX Control Mode—Operation changes depending
6. PBX Control
Mode
(Automatic
Note: Once the Service Mode has been changed, it is
Mode)
retained unless the System Manager or System
Administrator changes it again, even after the power is
cut and restored.
PBX Control Mode is available only if APT/DPT
Integration is activated with a Panasonic KX-TA series or
KX-TD series telephone system. If PBX Control Mode
does not function after it has been selected, the VPS will
operate in Automatic Mode.
Table 51
Description/Function
the Time Service.
on PBX time period.
Installation Manual