Panasonic KX-TVP50E Installation Manual page 18

VOICE PROCESSING SYSTEM OVERVIEW
System Components
AC Inlet:
Connects the power cable to an AC outlet dedicated for the VPS.
Power Indicator:
Indicates system status — when flashing, the system is off-line (not ready to receive calls).
MODE (DIP Switch):
(Check the status of this switch only at start-up.) Provides the following additional functions:
Position
0
1
2
*1
3
*1
4
5
6-7
8
9
10
*2
11
*2
12
13
18
Table 1
Additional Function
•1
0 1
Normal setting. (All switches in 0 position.)
•2
0 1
•3
0 1
•4
0 1
Initialises RS-232C parameters.
0 1 •1
0 1 •2
0 1 •3 RS-232C default parameters: 9,600, N, 8, 1
0 1 •4
Auto Configuration is automatically executed and
•1
0 1
•2
0 1
•3 all ports are set for Automated Attendant service.
0 1
0 1 •4
Auto Configuration is automatically executed and
0 1 •1
0 1 •2
0 1 •3 all ports are set for Voice Mail service.
0 1 •4
Reserved.
Initialises the VPS. Clears all voice data (except
0 1 •1
0 1 •2
0 1 •3 User 1 and User 2 prompts) and returns all system
0 1 •4
parameters to the default setting.
Reserved.
Initialises the VPS. Clears all voice data and
returns all system parameters to the default setting.
•1
0 1
•2
0 1
This makes more recording time available —
•3
0 1
•4
0 1
about 1 h — if User Prompts have been recorded.
CAUTION: User 1 and User 2 Prompts are
erased!
Reserved.
Auto Configuration is automatically executed and
0 1 •1
•2
0 1
•3 all ports are set for Automated Attendant service.
0 1
•4
0 1
Auto Configuration is automatically executed and
0 1 •1
0 1 •2
0 1 •3 all ports are set for Voice Mail service.
0 1 •4
•1
0 1
All service prompts are set to System Prompts.
•2
0 1
•3
0 1
•4
0 1
0 1 •1
All service prompts are set to User 1 Prompts.
0 1 •2
0 1 •3
0 1 •4
Installation Manual