Table of Contents
Advertisement
MESSAGE MANAGER'S GUIDE
7.
To change all prompts in a row:
a)
Press [2]
b)
Enter the prompt number you want to change. (There is a complete list of modifiable
prompts in D9 LIST OF MODIFIABLE PROMPTS.)
c)
The VPS plays the prompt number.
d)
Press [1] to change the prompt.
e)
Record a prompt at the tone and Press [1] to end recording.
f)
Press [2] to accept the recorded prompt.
g)
The VPS plays the next prompt number.
h)
Repeat Steps 7d to 7g to record other prompts.
Note
User prompts can be saved in a personal computer (command SAVE through the RS-232C).
Once they have been saved, they can be restored (with the command LOAD) at any time.
There is a complete list of modifiable prompts and prompt numbers in D9 LIST OF
MODIFIABLE PROMPTS.
Recording System Caller Names
1.
Log in the Main Menu.
2.
Press [5] to modify messages.
3.
Press [8] to modify system caller names.
4.
Enter the Caller ID List Number
Note
• Enter [ ] to return to Step 3.
• To record system caller names, first Caller ID numbers must be assigned (see B6.6
Guidance is "Caller Name Announcement number".
*1
294
Note
• Press [2] to go to Step 7g.
• Press [3] to turn off/on the prompt.
Note
• Press [1] to review the recorded prompt.
• Press [3] to erase the recorded prompt and try again—Return to Step 7e.
• Press [ ] to erase the recorded prompt and exit—Go to Step 7g.
System Caller Name Announcement.)
(1-120) to be modified.
*1
Installation Manual
Advertisement
Table of Contents
Troubleshooting
