Panasonic KX-TVP50E Installation Manual page 263

Message Notification Status
24. a)
b)
c)
d)
e)
f)
g)
External Message Delivery Status
a)
25.
b)
c)
Installation Manual
The current setting is played. Press [1] to change the setting (enable or disable). If the
Message Notification Status is enabled, go to Step 22 b) below.
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number Entry
Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper (pager))
Confirm the entry is correct and Press [6] to accept it.
The current setting of MWL Notification for Unreceived Message is played. Press [1]
to change the setting (enable or disable).
Confirm the entry is correct and Press [2] to accept it.
The current setting of Device Notification for Unreceived Message is played. Press [1]
to change the setting (enable or disable).
Confirm the entry is correct and Press [2] to accept it.
The current setting is played. Press [1] to change the setting (enable or disable). If the
External Message Delivery Status is enabled, set the prompt mode for receiving
External Delivery Messages (go to Step 23 b) below).
The current prompt mode is played. Press [1], [2], [3], or [4] to choose the desired
mode.
• [1] System Prompt
• [2] User 1 Prompt
• [3] User 2 Prompt
• [4] Selective Prompt
Confirm the entry is correct and Press [5] to accept it.
SYSTEM MANAGER'S GUIDE
263