Connecting The Kx-Tvp50 With The Panasonic Kx-Td816, Kx- Td1232 And Kx-Td612; Kx-Td1232 Software Verification And Programming For Digital Integration Via The Manager's Extension - Panasonic KX-TVP50E Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
4.3 CONNECTING THE KX-TVP50 WITH THE
PANASONIC KX-TD816, KX-TD1232 AND KX-
TD612
Note
Do not use system programs [106] or [602] for DPT Integration. The following Section
(4.3.1 KX-TD1232 Software Verification and Programming for Digital Integration via the
Manager's Extension) is for the KX-TD1232 as examples. Please refer to them for the KX-
TD816 and KX-TD612.
4.3.1 KX-TD1232 Software Verification and Programming for
Digital Integration via the Manager's Extension
It is important that the KX-TD1232 has the proper software level to allow Digital Integration
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD1232 Installation Manual for instructions on how to enter the system
programming mode.
Software Verification
1.
Verify Software - If you are configuring a 2-cabinet system, remember to check both
cabinets. The software must be the same in each. Check the software version of the KX-
TD1232 using System Program [116].
Example: P111GYMMDDA
The underlined digits represent the software production date code (year, month, day).
Note
The following features are not available in case the software version of the PBX is
lower than the required version.
If these features cannot be used, confirm your PBX software version and consult
your dealer.
From the SYS-PGM NO ? screen:
a)
Enter [116].
b)
Press the NEXT button (SP-PHONE).
62
• Trunk Service
• Caller Name Announcement (System/Personal)
• Caller ID Call Routing
• Personal Greeting for Caller ID
Installation Manual