Panasonic KX-TVP50E Installation Manual page 209

Parameter
Message
Repeat Cycle
Note
Extension Call Forwarding to the VPS can override the operator call coverage settings
depending on the timing parameters of the PBX and VPS. Even if the operator call coverage
parameters are set to "Next Operator" on Busy/ No Answer, the call may go to the VPS (if
the Operator has set the call forwarding to the VPS).
Operator's Parameters - Day Mode - Operator 2
Operator-seeking calls are received at Operator 2 when Operator 1 is busy or does not answer
and Operator 1's parameters are set as follows.
• Busy Coverage Mode - No Answer Coverage
• No Answer Coverage Mode - Next Operator
To select Operator Parameters - Day Mode - Operator 2, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 2 - 1 - 2
Parameter
Operator's
Extension
Operator's
Mailbox No.
Installation Manual
Value Range
(Default)
1-3 times Specifies the number of times that the system will play the
Automated Attendant top menu.
(3)
Value Range
(Default)
1-5 digits Used to select the extension number for Operator 2. Any
valid extension number can be assigned.
(None)
2-5 digits Used to specify the mailbox number for Operator 2.
Callers to Operator 2 are prompted to leave a message in
(None)
this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.
SYSTEM ADMINISTRATOR'S GUIDE
Table 43
Description/Function
Table 44
Description/Function
209