Live Call Screening Button Assignment - Panasonic KX-TVP50E Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
1.
Enter Station Programming:
For KX-TA series
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series
Enter PITS programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the code for the mode you want this phone to have.
Hands-Free = #11(for KX-TA series) or 11 (for KX-TD series)
Private = #12 (for KX-TA series) or 12 (for KX-TD series)
Screen output: Hands-Free or Private
3.
Press STORE.
4.
Exit the program mode:
For KX-TA series
Set the MEMORY switch to "SET".
For KX-TD series
Press the PROGRAM button or lift the handset.
5.
Repeat these steps at each telephone.
Conditions:
For the KX-TD series only:
A single-line telephone that is connected to the same extension as a proprietary telephone can
also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is being
recorded. To intercept the call, hang up and go off-hook.

4.4.4 Live Call Screening Button Assignment

For the Live Call Screening feature to work at an extension, the extension must have an LCS
button on it and the button must be lit at the time of the message. This button must be either a
DSS/BLF or line key (must have a lamp). Follow the procedure below to assign an LCS button
on an extension. (This is station level programming and should be done at each individual
phone.)
1.
Enter Station Programming:
For KX-TA series
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (Line or DSS/BLF) key you want to assign as the LCS button.
68
None
Installation Manual