Panasonic KX-TVP50E Installation Manual page 233

Other Parameters - Dialing Parameter
To select Dialing Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 7 - 2
Parameter
Number of
Digits
to Access
Outside Line
Call Transfer
No Answer
Time
Outgoing Call
No Answer
Time
Pause Time
Installation Manual
Value Range
(Default)
0-8 digits Specifies the number of digits necessary to access an
exchange line.
(1)
Example:
If the PBX requires callers to dial "9" to access an
exchange line, this parameter should be set as "1." This
enables the system to recognise that an outgoing call
setup sequence is completed once the initial "9" has
been dialled (9-123-4567). The full sequence is
therefore: 9 - (outgoing call setup sequence) - 123-
4567.
The VPS can discriminate between local and long
distance calls and can report outgoing calls and calling
times for billing purposes on periodic port usage
reports.
10-60 s Specifies the amount of time that the VPS must wait
before retrieving the transferred call when there is no
(20)
answer at the destination extension.
10-90 s Specifies the amount of time that the VPS must wait
before concluding that there is no answer at the outside
(30)
number called.
1-9 s Specifies the pause time between dialled digits.
(2)
SYSTEM ADMINISTRATOR'S GUIDE
Table 60
Description/Function
233