Table of Contents
Advertisement
CUSTOMISING THE SYSTEM
5.1 STARTING UP
5.1.1 Before Programming
1.
Determine the customer's needs.
• Work with the owner, manager, and receptionist to build the Custom Service
• Figure out which ports are to be answered by which greetings.
• Check the software level of the telephone switch.
2.
Use "System Administration" and your computer for the startup sequence.
3.
After the system is "on line," disconnect the exchange lines going into the system until the
greetings have been completed.
4.
Work with the receptionist to record the system greetings.
• It's important to spend time training the receptionist. Making sure that the
• Show the receptionist how to transfer "general delivery mailbox messages."
5.1.2 Quick Setup
Quick Setup provides a quick way to set the following programming items. Each of these must
be initially set to start the VPS operation.
Note
Quick Setup requires VT100 emulation software.
1.
PBX type
2.
Extension numbers of VPS ports
3.
Extension numbers for mailboxes
4.
Creating mailboxes
5.
Port service setting
6.
Password setting
7.
Date and time setting
8.
Activating the Quick Setup
76
Greetings, and Holiday Greetings.
receptionist understands the system and can answer basic questions will save you
time in the end.
Installation Manual
Advertisement
Table of Contents
Troubleshooting
