Panasonic KX-TVP50E Installation Manual page 247

When your KX-TD series telephone system is in DPT Integration mode.
*1
When your KX-TA series telephone system is in APT Integration mode.
*2
N/A Not available
— Not needed
Note
The UK version KX-T1232 does not support Inband Integration.
Parameter
Integration
Mode
Installation Manual
Value Range
(Default)
1. None Specifies the method of integrating the VPS with the
2. Inband PBX.
3. APT
1. None - Both PBX and VPS work independently,
4. DPT
(DPT)
2. Inband - The PBX sends touchtone codes to the VPS
3. APT - The VPS communicates with the PBX via the
4. DPT - The VPS communicates with the PBX via the
If set to "APT" or "DPT", the extension numbers of VPS
Port 1 and VPS Port 2 can be assigned in sub-parameter.
Note: The UK version KX-T1232 does not support
Inband Integration.
SYSTEM ADMINISTRATOR'S GUIDE
Table 72
Description/Function
without accessing information concerning the status
of the other.
to indicate the state of the call (busy, answered,
disconnect, etc.). VPS performance is improved with
Inband Integration because call state recognition is
faster than with standard call progress tone detection.
The PBX code for each call state must be set in the
Inband Signaling Parameters. If PBX type is set to a
KX-T series telephone system, the Inband Signaling
Parameters will automatically default to the proper
codes. This is available with any of the following
Panasonic KX-T series telephone systems:
TA series, T96, T336, TD816, TD1232, TD612.
APT interface. This is available only with Panasonic
KX-TA series.
DPT interface. This is available with any of the
following Panasonic KX-TD series telephone
systems: TD816, TD1232, TD612.
247