Panasonic KX-TVP50E Installation Manual page 48

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Code
(default)
8
9
#9
Digit Translation Table Parameters
These parameters allow PBXs that have a fixed Follow-on ID sequence to be used with the
KX-TVP50. For example, a Follow-on ID sequence of [
by using these parameters.
• Inter-Digit Time-Out: This parameter defines the duration of incoming signals
(Follow-on ID) from the PBX to the VPS. The Digit Translation Table is applied to the
digits received within this time.
• Input-Output (up to 8 alphanumeric characters): When the system receives digits
within the inter-digit time, it checks them against the input table. If they are found, the
system utilises the output digits in their place.
The Remainder of this section consists of step-by-step guides for software verification
and programming of the recommended Panasonic PBX systems.
48
Call State
Forwarded to Extn. The extension dialled is forwarded to another, non-Voice
Mail extension.
Confirmation Tone The Message Waiting Lamp On or Message Waiting Lamp
Off code is dialled successfully.
Disconnect The caller disconnects. The local exchange must send a
CPC signal to the PBX for this feature to work on outside
calls.
Table 11
Sent to the Voice Mail Port When...
201] can be changed to [#6201]
Installation Manual