Table of Contents
Advertisement
SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Paging Code
for Group 1-8
Paging Code
for All Groups
Other Parameters - Fax Management
The VPS can be programmed to automatically transfer incoming fax calls to a fax extension.
A maximum of 2 fax extensions can be specified as the destination for the Automatic Fax
Transfer. If the main fax extension is not available to receive a fax, the VPS will transfer the
fax transmission to the alternate fax extension.
To select Fax Management, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 7 - 8
Parameter
Automatic
Transfer of
Incoming Fax
Call
240
Value Range
(Default)
Up to 12 digits
Specifies the intercom paging access code required by
consisting of
the PBX.
0-9, ,# for each
group
Note: The Intercom Paging Group Number available
(Group 1-8: 331-
for each Subscriber is determined on a COS-by-COS
338
basis.
(for KX-TA series)
or
6301-6308
(for KX-TD816/
1232)
All Groups
(Group 9): 33
(for KX-TA series)
or
63 (for KX-
TD816/1232))
Value Range
(Default)
1: Disable
Used to enable or disable the Automatic Transfer of
2: Enable
Incoming Fax Call Service.
(Disable)
Note: Automatic detection works for only the first 30s.
Table 65
Description/Function
Table 66
Description/Function
Installation Manual
Advertisement
Table of Contents
Troubleshooting
