Attach The Covers - Precor Elliptical Fitness Crosstrainer Experience 700 Series Assembly Manual

Attach the covers

The EFX ships with the following cover parts: Two side covers, one front cover,
and two cover retention brackets.
Attaching the plastic covers:
1. Insert seven plastic grommets into the frame in following locations:
Figure 8
2. Attach the base cover by fitting its plastic tab into the base frame, then slide the
cover forward and downward to snap it into place.
3. Attach the base cover using two screws
4. Attach the front of the base plastic using two screws
Figure 9
.
.
Figure 10
8