Interrupt Copy - Kyocera TASKalfa 250ci Operation Manual

Basic Operation

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE:
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically
cancelled and printing resumes. You can change the delay until interrupt copying is cancelled. Change the
delay as required. For more information, refer to Interrupt Clear Timer on page 8-70.
Ready for interrupt copy.
Copy Image
Place original.
Auto
Original : ---
Zoom : 100%
2-sided
---
Paper :
>>2-sided
Preview
Quick Setup Org./Paper/
Finishing
Status
3-24
Downloaded From ManualsPrinter.com Manuals
100% Normal 0
Paper Zoom Density
Selection
2 in 1 Off
Duplex Combine Staple/Punch
Color/ Layout/Edit
Image Quality
1
Press the Interrupt key.
Copies
1
Ready for interrupt copy. is displayed.
Shortcut 1
Shortcut 2
The current print job is temporarily interrupted.
Shortcut 3
Shortcut 4
Shortcut 5
Shortcut 6
Advanced
Setup
10/10/2008 10:10
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
OPERATION GUIDE