Interrupt Copy; Canceling Jobs - Kyocera ECOSYS M4125idn Operation Manual

Operation on the Machine > Copying

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
NOTE
• If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically
cancelled and printing resumes. You can change the delay until interrupt copying is canceled. Change if
needed.
Interrupt Clear Timer (8-57)
[Priority Override] (6-36)
1
Configure the settings.
1
Select the [Interrupt] key.
The current print job is temporarily interrupted.
2
Place the originals onto the machine for interrupt copy, and configure the copy settings.
2
Press the [Start] key.
Interrupt copying begins.
3
When interrupt copying ends, select the [Interrupt] key.
The machine resumes the paused print jobs.

Canceling Jobs

1
Select the [Stop] key with the copy screen displayed.
2
Cancel a job.
When there is a job is being scanned
The copy job is canceled.
When there is a job printing or on standby
Canceling job screen appears. The current print job is temporarily interrupted.
Select the job you want to cancel. > [Connected Device List] > [Yes]
NOTE
If "Reserve Next Priority" is set to [Off], the Copying screen appears in the touch panel. In such case, selecting
the [Stop] key or [Cancel] will cancel the printing job in progress.
Reserve Next Priority (8-23)
5-13